Power and Energy

Read the live flow

The Power tab leads with total live watts and an animated path from power sources to measured equipment.

• ✓
  Grid power rises from below.
• ✓
  When a connected Sense monitor reports solar production, gold solar power enters from above with live watts.
• ✓
  Each metered device appears in the equipment flow.

Energy gauges

These four gauges separate the current draw from accumulated energy history.

When a device is not metered

Equipment without a compatible energy-reading path shows not metered. Node One does not estimate a number it cannot read.

Set mains voltage

1. 1

   Open Node

   Go to the Node tab, then Display.

2. 2

   Choose Mains voltage

   Select the value that matches your electrical service, from 100 to 240 V.

3. 3

   Review bank power

   Node One uses the selected voltage to convert supported controller bank current into watts.